SE216 is a PCIe development board for SOM3 module . It is a simpler version of SE215 carrier and offers X1 Gen2 PCIe interface. It includes JTAG and UART, through a micro USB connector. The card provides Power GOOD and user LEDs for rapid debugging. A Low Pin Count (LPC) FMC site is also available. USB AB, RJ45 and IO header pins are also on board.
A power jumper (B4 jumper) can change the Bank 4 IO between 1.8 and 2.5V.
Features
- Slot for SoM3-MPFxxxT module (MPF300T-1FCVG484 FPGA)
- USB – JTAG and USB – UART bridge via FT4232H IC, connector – micro USB;
- FMC LPC Vita 57.1 connector for functional extension, with ten gigabit lane;
- FMC VADJ supported 1.2V, 1.8V, 2.5V;
- RJ45 connector for 100/1000Mbit Ethernet connection*;
- PCIe x1 Gen 2 EP for communication with PC,
- Three LEDs for power GOOD;
- Five User LEDs for debug purposes;
- Two user button and four dip switches;
- 12V input power connector;
- Temperature range, 0°C to +100°C;
- Maximal power consumption, including FMC LPC, is 15W;
Applications
- Defense
- Control
- Instrumentation and testing
- Embedded and Indsutrial
SE216 Block diagram
SE216 Placement diagram
Example Libero project and confidence test application will be provided, including driver from Microchip.
SE216 the carrier card without the SOM3 module
SE216-eval SE216 + SOM3-MPF300T
